LW Seecamp

What products are listed for this advertiser?

American Made Firearms, Made in America Guns, Made in America Handguns, and American Made Pistols.

Ludwig (Louis) Wilhelm Seecamp (1901-1989), after whom the company was named, was trained as a master gunsmith in the technical academy system of pre World War II Germany. Having survived the Eastern Front in an elite Gebirgsjaeger (Mountain Troops) unit, he brought his family to the United States in 1959 by way of Canada. From 1959 until his retirement in 1971, he was the gun designer for O.F. Mossberg.
L.W. Seecamp Co, Inc. was founded in 1973 as a family business specializing in Ludwig's patented (#3722358) double action conversion of the venerable 1911 semi-auto pistol (Colt .45). This conversion, done during a period when the single-action versus double-action controversy was at its peak, resulted in the first commercially available DA .45 autoloaders anywhere in the world. Nearly 2000 such DA conversions were done from the early 70s to the early 80s. Ludwig had become a firm believer in the value of DA after a Walther P-38 saved his life in WWII. That incident, which left him with a cheek-long scar and some missing teeth from a bullet wound, also convinced him point shooting rather than sight use is the reality in close range combat. Having been a fan of the 1911 but being also an advocate of DA carry, commercial conversions were a natural outgrowth of the Colt 45 that Ludwig had converted to DA for his own personal protection.
In 1979 Seecamp Co. introduced as part of its gunsmithing package the telescoping recoil system that has become the predominant spring system used by modern short-slide short-recoil autoloaders. This system is the subject matter of patent #4201113 issued to Ludwig's son and Seecamp Company co-founder Lueder (Larry) Seecamp. In the September/October 1979 issue of American Handgunner in an article entitled The Rolls Royce of Bobcat .45's, Mason Williams said, This is such a major development in the field of (miniaturization of) automatic pistols that it could easily be considered the most significant development in a hundred years in the field. While the patent was still active, the system was used by Glock, Colt, Kahr, Cylinder and Slide, Para-Ordnance and Lasermax (for use in the laser units for the mini-Glocks). After the expiration of the patent in 1998, other manufacturers such as Kimber, Taurus, IM Metal, Springfield Armory, etc., quickly adopted the system for use in their short slide autos.
By the late 1970s a number of DA .45s, including the excellent Browning BDA (later SIG), had appeared on the market. Gunsmithing was thus abandoned for manufacture. Introduced in 1981 was the LWS .25 to fill a niche that had fallen into neglect. After the Gun Control Act of 1968, small quality pistols were hard to find. Moreover, the brilliant concept of double action only had lain dormant for over a quarter century and was due for a revival. All DA only pistols, more properly referred to as trigger cocking only pistols, are the grandkids of either the Czech CZ36/CZ45 design if they have hammers or the French LeFrancais design if they are striker fired. The LWS is a descendant of the Czech line. The Glocks and the Keltecs are descendants of the French line. Credit should be given where credit is due.
The LWS .25 helped revive DA only and small pistol manufacture. It was the world's first stainless steel DA only pistol, and it was also the first DA only hammer fired semi-auto made in the USA. This design was covered by U.S. patents 4,428,138 and D269,896 issued to Ludwig (Louis) Seecamp. The LWS design has remained essentially unchanged since 1981 except for caliber - the numbers after LWS designating the caliber upgrade.
Prior to the introduction of the LWS .25, firearms manuals did not address the issue of self-defense. It was pretended in the manufacturers' instruction manuals, no doubt on the advice of high priced lawyers, that every pistol was a target pistol. Extensive sections of our first manual were reprinted in gun magazines because a manufacturer officially acknowledging self-protection as a legitimate reason for owning a firearm was a completely novel concept at the time. It was almost as shocking as bringing out a pistol without sights.
Around 1985 the LWS .25 was discontinued and the LWS .32 was introduced. The larger caliber pistol remained exactly the same size, which at the time was considered an amazing feat. The caliber .32 had at the time of the introduction of the LWS .32 been relegated to the dustbin of firearms history. Today .32 caliber is thriving in very great part because of the LWS .32 and its clones - and the demonstration that such a market existed.
2003 saw the introduction of the LWS .380 to commerce, which gun is identical in size and weight to the LWS .25 or the LWS .32. As to the benefits of the larger caliber: There are stopping power arguments about bullet speed but no one argues about hole size. A bullet that is less than .380 size may or may not expand to .380 size. A bullet that is already a .380 doesn't shrink. While larger calibers are generally more effective, smaller calibers are easier to manage for recoil recovery time - the time it takes to control follow-up shots. It is therefore a shooter's choice as to whether the LWS .32 or the LWS .380 is the more effective weapon for them. (A 34 ounce bat works well for some hitters, but big bats only offer an advantage if they can be easily controlled. The rule of thumb is, the biggest bat you can easily control is the best bat for you.)

The following is a reply from LW Seecamp to our question – "Are your products Made in America?"

How do you know the products you have listed are Made in the USA?
Before including products in our database we review the advertiser’s website and/or contact them to ascertain the origin of their products. Some advertisers sell both Made in USA products and foreign ones. Therefore we highly recommend you review FAQ 2.

We immediately investigate any complaints regarding deceptive Country of Origin claims. If we determine an advertiser's claim is not truthful we will immediately remove the product/s from our database and suspend our relationship with the Company making the claim.

To document your complaint, email us by using our Contact Us page. We can only respond to complaints that have been submitted in writing.

What does Made in USA mean?
There is no law requiring most products to be labeled Made In USA, or have any other disclosure about the amount of U.S. content. However, for job creation purposes (see our Big Secret tab), if you have a choice between an imported product and one with no country of origin on its label, choose the product without a country of origin over the imported one. This is true because the product without the country origin on its label has at least some American labor in its content and the imported one most likely does not.

Note: Imported products are required by law to country of origin on their label and products partially Made In USA do not. To answer this question completely reviewing our Labeling Tips 1, 2 & 3. These tips are accessible from scrolling to the bottom of our home page clicking Browse All Tips button.