High Sierra Showerheads
What products are listed for this advertiser?
Made in America Handheld Showerheads / Shower Heads, and American Made Showerheads / Shower Heads.
Without noise or temperature drops, a 1.5 gpm* stream is transformed into a full coverage spray of rain-like droplets with just the right force for showering and rinsing hair. Although the HighSierra Showerhead? flow is 40% less than traditional low flow showerheads, they are even less likely to plug. This is because the recently patented design creates a wide spray using a single orifice rather than many tiny orifices.
Incredibly, the plugging problem of low flow showerheads is not limited to the orifices alone. Nearly all of our competitors' models come equipped with the same pressure regulator design that directs water flowing into the showerhead through a narrow gap between a flattened 0-ring and a plastic ring (see Photo B below).
This gap will likely plug before the showerhead does. The HighSierra Showerhead? pressure regulator is the only one in the industry that regulates the flow of its showerheads using a time-tested single hole, conically shaped diaphragm with plenty of space for solids to pass through.
The new HighSierra Showerheads? LLC brand of 1.5 gpm*, water-saving shower heads is the first in the world to completely discard the old-fashioned ways of producing a low flow shower. That is because the decades-old methods of creating sprays (namely using multiple orifices or injecting air) just do not work when flows are reduced to under 2 gpm.
HighSierra Showerheads? utilize a new green technology (FCS?) that produces a luxurious-feeling spray from only 1.5 gpm* without plugging, making noise, or creating temperature drops. It is truly an amazing shower experience.
* Accuracy of flow rate is ? 10% between 30 psi and 80 psi
Ready to buy a HighSierra? Go to our products page, explore, and choose your style.
Small carbon footprint:
At about 2.5 inches long and 1 inch wide, this mighty mite uses less material and energy in its manufacture -- and it won't crowd a smaller shower area.
Non-plugging Design:
No need for gimmicky self-cleaning features with the FCS? Technology. Water passageways are so large that they do not plug and do not need cleaning.
Pressure-compensating Flow Control:
Maintains constant 1.5 gpm* flow at varying pressures.
Small carbon footprint:
At about 2.5 inches long and 1 inch wide, this mighty mite uses less material and energy in its manufacture -- and it won't crowd a smaller shower area.
Non-plugging Design:
No need for gimmicky self-cleaning features with the FCS? Technology. Water passageways are so large that they do not plug and do not need cleaning.
Pressure-compensating Flow Control:
Maintains constant 1.5 gpm* flow at varying pressures. Although the HighSierra Showerhead? flow is 40% less than traditional low flow showerheads, they are even less likely to plug. This is because the recently patented design creates a wide spray using a single orifice rather than many tiny orifices.
Incredibly, the plugging problem of low flow showerheads is not limited to the orifices alone. Nearly all of our competitors' models come equipped with the same pressure regulator design that directs water flowing into the showerhead through a narrow gap between a flattened 0-ring and a plastic ring (see Photo B below).
This gap will likely plug before the showerhead does. The HighSierra Showerhead? pressure regulator is the only one in the industry that regulates the flow of its showerheads using a time-tested single hole, conically shaped diaphragm with plenty of space for solids to pass through.
Without noise or temperature drops, a 1.5 gpm* stream is transformed into a full coverage spray of rain-like droplets with just the right force for showering and rinsing hair.
Small carbon footprint:
At about 2.5 inches long and 1 inch wide, this mighty mite uses less material and energy in its manufacture -- and it won't crowd a smaller shower area.
Non-plugging Design:
No need for gimmicky self-cleaning features with the FCS? Technology. Water passageways are so large that they do not plug and do not need cleaning.
Pressure-compensating Flow Control:
Maintains constant 1.5 gpm* flow at varying pressures. Although the HighSierra Showerhead? flow is 40% less than traditional low flow showerheads, they are even less likely to plug. This is because the recently patented design creates a wide spray using a single orifice rather than many tiny orifices.
Incredibly, the plugging problem of low flow showerheads is not limited to the orifices alone. Nearly all of our competitors' models come equipped with the same pressure regulator design that directs water flowing into the showerhead through a narrow gap between a flattened 0-ring and a plastic ring (see Photo B below).
This gap will likely plug before the showerhead does. The HighSierra Showerhead? pressure regulator is the only one in the industry that regulates the flow of its showerheads using a time-tested single hole, conically shaped diaphragm with plenty of space for solids to pass through.
The new HighSierra Showerheads? LLC brand of 1.5 gpm*, water-saving shower heads is the first in the world to completely discard the old-fashioned ways of producing a low flow shower. That is because the decades-old methods of creating sprays (namely using multiple orifices or injecting air) just do not work when flows are reduced to under 2 gpm.
HighSierra Showerheads? utilize a new green technology (FCS?) that produces a luxurious-feeling spray from only 1.5 gpm* without plugging, making noise, or creating temperature drops. It is truly an amazing shower experience.
* Accuracy of flow rate is ? 10% between 30 psi and 80 psi
The following is a reply from High Sierra Showerheads to our question – "Are your products American Made?"
How do you know the products you have listed are Made in the USA?
Before including products in our database we review the advertiser’s website and/or contact them to ascertain the origin of their products. Some advertisers sell both Made in USA products and foreign ones. Therefore we highly recommend you review FAQ 2.
We immediately investigate any complaints regarding deceptive Country of Origin claims. If we determine an advertiser's claim is not truthful we will immediately remove the product/s from our database and suspend our relationship with the Company making the claim.
To document your complaint, email us by using our Contact Us page. We can only respond to complaints that have been submitted in writing.
What does Made in USA mean?
There is no law requiring most products to be labeled Made In USA, or have any other disclosure about the amount of U.S. content. However, for job creation purposes (see our Big Secret tab), if you have a choice between an imported product and one with no country of origin on its label, choose the product without a country of origin over the imported one. This is true because the product without the country origin on its label has at least some American labor in its content and the imported one most likely does not.
Note: Imported products are required by law to country of origin on their label and products partially Made In USA do not. To answer this question completely reviewing our Labeling Tips 1, 2 & 3. These tips are accessible from scrolling to the bottom of our home page clicking Browse All Tips button.